Illustrative still life of three clear unbranded gel heat packs on a folded towel beside an empty saucepan on a wooden counter

TearRestore Mask Routine: Click, Reset and Store

How the TearRestore mask heat pack activates with a click, resets with a boil, recovers from crystals and stores, per TearRestore's instructions.

Illustrative still life of three clear unbranded gel heat packs on a folded towel beside an empty saucepan on a wooden counter

Illustration only: generic, unbranded heat packs and a saucepan, used to picture the store-and-reset routine this guide describes. This is not a photo of TearRestore or Beminda products and does not show their design, materials or results.

If you own a TearRestore mask, or you are deciding whether to buy one, the routine is the part worth understanding before you start. This guide puts TearRestore's published instructions in the order you will meet them: activate, fit, check, reset and store.

It also covers what TearRestore says to do when a pack turns solid at the wrong moment. It closes with a plain side-by-side of this routine and the routine for the Beminda Steam Therapy Pro, so you can weigh the two for yourself. Every figure below comes from TearRestore's own pages or, for the comparison, from Beminda's current S-400R manual.

If you already own the mask, work through the sections in order the first few times. If you are still deciding, the side-by-side table near the end is the quickest way to see what each routine asks of you.

What is the TearRestore Thermal Mask?

TearRestore describes the Thermal Mask as an open-eye design with self-heating technology that is activated by pressing a metal disc, with no microwave needed. TearRestore

TearRestore also states that the mask is reusable up to 90 times. TearRestore

That number is the maker's own statement, reported here as written. This guide has not tested it, and it is not a promise about how long any single pack will last.

How do you activate a TearRestore heat pack?

TearRestore says to flex the small disc of metal inside each pack until crystals appear, which switches on the warmth. TearRestore

Then knead it until evenly warm, and never microwave it. TearRestore

TearRestore says massaging the activated pack helps spread the heat through the mask and helps keep it from hardening too quickly. TearRestore

How does the pack attach to the mask?

Line up the pack's openings to match the mask, TearRestore says, then catch its edges on the eye-opening hooks. TearRestore

What if the frame does not fit your face?

TearRestore says the plastic frame can be bent by hand for a better fit, and that the packs should still fit after the frame is adjusted. TearRestore

How should you check the warmth before wearing it?

TearRestore says to test it on the back side of a hand and give it 1 minute if it feels too hot. TearRestore

How do you reset a TearRestore heat pack?

For an ordinary reset, TearRestore says to boil the pack 5 to 10 minutes or use its One-Click Kettle, until fully liquid, then leave it to cool. TearRestore

TearRestore also says packs should be back at room temperature before you use them again after boiling. TearRestore

So a reset has two parts to plan for: the boil itself, and the cool-down afterward.

What if a pack turns solid again, or arrives solid?

The 15-minute figure below applies only to a re-boil.

TearRestore says that if the contents do not fully return to liquid, the pack may turn solid again. TearRestore

Find your situation in the left column, then follow the step beside it.

Situation What TearRestore says to do
Solid after boiling Re-boil gently at a rolling boil until clear and crystal-free, 15 minutes at most.
Solid on arrival Shipping can cause this; it is not a defect. Boil until clear, then let it reach room temperature.
Crystals keep coming back Contact TearRestore support.

Source: TearRestore's FAQ. TearRestore

How should you store and rotate the packs?

If you do not use the packs every day, TearRestore recommends storing them as a liquid, which it says helps extend their lifetime. TearRestore

The FAQ adds that stored packs belong at room temperature, completely reset and cool. TearRestore

TearRestore recommends rotating packs to spread wear and keep a cooled one ready. TearRestore

For comparison, here are the official cleaning steps for other reusable heated eye masks.

How does this routine compare with a rechargeable steam mask?

For a wider look at preparation steps across formats, see how other reusable and single-use compress formats get warm or cold.

The Beminda Steam Therapy Pro is a rechargeable, hands-free steam eye mask.

Its current S-400R manual gives these steps.

Charge it fully before first use, about 3 hours, with the supplied USB-C cable and a standard DC 5V 1A adapter, which is not included. Beminda

To fill it, switch it off, unplug the charging cable and add up to 5 ml of water with the small filling bottle without overfilling, then press the stopper firmly closed. Beminda

Use still, unflavored bottled drinking water only. Do not add anything else.

Before a session, remove glasses, contact lenses, false eyelashes and heavy eye makeup, check the detachable silicone cushion is fitted and adjust the strap to fit gently without pressure on the eyes. Beminda

The current model has three 12-minute modes: continuous warm mist, interval warm mist and cool mist. Each mode lasts 12 minutes, including approximately four minutes of warm-up in the warm modes.

Keep your eyes closed during the session. Beminda

Empty, clean and dry the mask after each use.

Afterward, empty any remaining water and leave the stopper open so the tank can dry before storage. Beminda

Remove the detachable silicone cushion, rinse it separately with warm water and let it dry completely before refitting. Beminda

Do not submerge or rinse the electrical body. Beminda

The two routines side by side

Stage TearRestore Thermal Mask Beminda Steam Therapy Pro
Getting ready Press the disc so the pack starts heating Charge, then fill up to 5 ml of water
Fit Bend the plastic frame by hand if it does not fit Remove glasses, contact lenses, false eyelashes and heavy eye makeup
Warmth Massage it so warmth spreads across the mask Warm modes include approximately four minutes of warm-up within each 12-minute mode
After use Boil until fully liquid, then let it return to room temperature Empty, clean and dry the mask
Ongoing care Store packs as liquid if not used every day Rinse the silicone cushion and let it dry

The table lists steps only. It does not compare warmth, comfort or results, and each column describes only its own product.

If a charge-and-fill routine suits your day better than a boil-and-cool routine, the Beminda Steam Therapy Pro is one option to consider. It has three 12-minute modes. It uses still, unflavored bottled drinking water only.

The short version

Run the steps in the same order each time: activate, fit, check, wear, reset, cool and store. If a pack turns solid when it should not, go back to the troubleshooting table above for what TearRestore says to do.

Sources

  1. Thermal Mask Starter Kit – TearRestore
  2. FAQ – TearRestore
  3. customer resources – TearRestore
  4. Beminda S400R verified gift buyer setup, contents and personal-use label
  5. Beminda S-400R User Manual and Care Guide, water-only revision, 29 October 2026 (complete setup and controls evidence)
  6. Beminda S400R verified owner controls, indicator lights and cushion care

Bake the best cakes without the cakes.

Super amazing nice

Back to blog